Vehicle signage is new age method of advertising. Using your vehicle as a mobile billboard is simply an awesome way to advertise your product and stand out. There are various methods of vehicle signage and they do more than advertising your business, they make your vehicle look attractive and they also protect it from various kinds of wear and tear. This signage is easy to install and cost-effective as well.
Totally Three Types of Ways Are There in Which Vehicle Signage Can Be Done:
This is one of the foremost methods of vehicle signage. Wrapping is mainly done on the side walls of the vehicle. Stickers made of vinyl are the best ones suited for this. We should always have a template ready in our hand before starting. This accurate template will help the designer to make the vehicle signage just as the template provided and he will not have to change anything in the main vehicle if all the mistakes or doubts are cleared up beforehand while preparing the template. It is very important to take into consideration as of which printing company the client uses. Gathering information on all these before starting is a must. A designer should know which car model he has to signage through maybe some photos. He should also take notice if the car has some irregularities on the surface so that he can prepare the template as such.
#2. Vinyl Graphics and Lettering:
This is also another way in which vehicle signage can be done. The rough sketch of the vehicle and the graphic we want on it is the primary thing. Narrow and multiple designs are better than single large designs for a good amount of space. A sheltered space is a must for installation. Avoiding any sort of small winds are good because they do not allow tangling of the tape. The temperature should be about 55 to 80-degree Fahrenheit. Sun should be avoided to prevent evaporation. The wetting agent should be made in a proper way like- we can take a bottle and add a half cup of alcohol in that along with some drops of detergent for dishes and then use it. Collisions with the badges and door bangles need to be avoided. Trimming can be done where necessary. After proper placing comes the work of fingers which can be applied to give a small amount of pressure to stick. Waiting time is approximately 10 to 12 minutes which enables proper fixing of the vinyl.
This is one of the ways of a vehicle signage which needs proper care and adequate maintenance is also required. These are not recommended in the vehicles which need to travel at a great speed. The magnet should be properly attached in any car so that the wind does not get to catch under it and transform it into a sail. This can be a major cause of road accidents. Proper cleaning and perfect drying up of these signs is a must. If any kind of dust accumulates, it turns into an abrasive and also it enables the magnet to lose connection with the vehicle thus enabling it to have a risk of flying off at a greater speed. The paint of the vehicle body can often be damaged due to re-positioning the magnet. Only steel surfaces can accumulate the magnets which are a serious limitation.
Keeping all these tips in mind we can easily go and get a good vehicle signage anytime.