If you really are a Comcast customer, it’s good to know what exactly is 10.0.0.1 and also how to use it to login into your Comcast Xfinity router. If you are not sure about the reasons why you have to login into your router, here Are Only a few of them:
• To secure your home network by simply changing the router SSID and wireless password.
• Enable MAC filtering only trusted devices can connect with your home wi fi.
• You can create an guest network.
• Set up Parental controls.
• Troubleshoot some minor network connectivity problems.
In the event that you want to login into your router using the 10.0.0.1 internet protocol address, you can use any browser that’s installed in your personal computer tablet computer or smartphone. The only condition is the fact that the device needs to be connected to your home wireless network.
Comcast Xfinity admin login using 10.0.0.1 (default gateway)
Step 1 — Connect to the network
To begin with, make sure that the device you might be working on is connected to your home wi fi network. When possible, it’s recommended to use a cable connection when you make those changes, jut in order to avoid getting logged off when you click on the Save button again.
Step 2 — Enter 10.0.0.1 in the URL bar
By the mentioned device open your web browser.
Typing the default ip address from the address field and hitting the Enter key on your computer keyboard will automatically take you for the router’s login page.
Just in case the login window doesn’t appear try the following IP address — 192.168.100.1
There was not any need to add https:// or http:// at front of this internet protocol address. The browser does this automatically.
Generally, 192.168.100.1 can also be used as an default IP address for Comcast routers. However, it’s recommended to check if these could be the correct default IP address. You can easily try so using the Command prompt and typing the IPCONFIG command. The internet protocol address recorded as Default gateway would be the most correct one.
Step 3 — Type the default login details
When the login window appears type the following
• ADMIN — just as a username
• PASSWORD — just as a password
Click “LOGIN” and when the username and password are correct you may be redirected into the router configuration settings page.
But in case for some reason that the default username and password (admin/password) are not working, you can try the following login combinations we have found online.
• USERNAME: root, admin, admin, cusadmin
• PASSWORD: root, Motorola, w2402, highspeed
Thus, when you see that the”in a GLANCE” page, this means you have done everything correctly.
Step 4 — Note of the IP and login details
Right now It’s highly advised to make a quick note of the following:
• 10.0.0.1 (default gateway)
• default login credentials (username and password)
You may need these just in case you want to view or modify the router settings.
Ferquently Asked Questions:
• The login page is not loading?
The device you are trying to login is not connected to your home wireless network. Make sure you connect original and try again. To fix that you should have to connect using an Ethernet cable.
You are using the wrong IP address for a default one. There can also be additional IP addresses (default gateways) getting used 192.168.0.1, 192.168.1.1, 192.168.1.254 etc forth, therefore it is ideal to come across the router default ip address via the Command prompt and try again.
• The login credentials are incorrect?
Generally this happens in the event that you or someone else has changed the login details before. There really are certainly a few things you can perform.
First try the usernames and passwords we have supplied above.
Should they do not do the job, check your user manual or search online for your specific router model login credentials.
After you have done everything, the previous alternative would be to reset your router. After you reset it you may have the ability to login with the default username and password password.
• I can’t login with 10.0.0.1?
Well, perhaps you happen to be typing this internet protocol address incorrectly. Many users type 10.0.0.0.1 from the address field. It’s not just a valid IP address. Just make sure that you type the correct ip address.
• How to reset my Comcast router?
Before you begin it’s important to know that after the procedure your router is going to likely be restored to factory settings, which means that your preferred network name, wi fi password etc forth will soon likely be erased and set to default values. In the event that you want, take a note of these to change them later.
In the event you have to reset your wireless router to default settings, it’s wise to search online for specific model instructions. However, some general measures are as follows:
• Locate the RESET button at the back of router
• Use a sharp object like a pencil or non-metallic object to press on the button
• Press it again and hold it to 10 20 seconds until the power light blinks
• Next release the button
• Await the router to reboot
• Now when your router has been restored to default settings try the 10.0.0.1 internet protocol address, username and password by the user manual or perhaps the tag located under the router (when there was some).
Because you can see, the login process is quite simple and easy and anyone can do this.
Thus, once you decide to access your router admin page and then modify some of the settings for virtually any reason, you know exactly what to accomplish.