Snorkeling is a beautiful sport to indulge in. After all, the soothing and pristine views underwater outdo themselves. The time period you spend snorkeling underwater should be just you and the underwater magic, with no obstructed view whatsoever. It is understandable that any barrier between you and a clear view of your surroundings there is extremely annoying and needs to go. It is too bad that many people using the best full face snorkel mask 2018 experience the mask fogging up which definitely ruins their adventure. So, here is how to prevent this from happening!
Clean and Clear:
The biggest reason for the best full face mask 2018 fogging up is an unclean surface on the inside of the mask lens. Whenever moisture builds up, it requires some surface to cling on to and liquefy into droplets. If your mask has particles of dust or oil on it, voila, the moisture just found the perfect place.
This is why you should clean your snorkel mask lens spotless after use and even just before you use it. Make sure that its surface is free from any dust, sand, oil or any other thing that the moisture might get attracted to. With a clean mask on, no matter how much moisture builds up it will pool in the bottom of the mask and not fog up the lens.
Consider Tightening It Up:
What happens most often than not in cases of the best full face snorkel mask fogging up is that the wearer has the mask on too loose. This results in the exhaled air from the mouth entering into the lens of the mask. Try tightening your mask to a full and secured fit against your face.
Do Not Touch the Lens:
If you think that dirt buildup on the lens is the reason, clean the lens well. However, follow some guidelines for cleaning it. The most important thing is to not touch your fingers to the lens. While you might think you are cleaning the lens, what you are doing is rubbing off oils onto the lens. This further worsens the problem, so don’t attempt it. What you could do rather is use a soft cotton cloth to clean the lens. Remember to use hot water to clean the lens of your snorkel mask more effectively.
If none of the above work, you will have to resort to the use of anti-fog sprays and solutions. These solutions are called surfactants because what they do is reduce the surface tension of the liquid that contacts them. In case of snorkel masks that liquid is water. So basically, the water will not easily cling to the surface of the lens and rather just glide off, giving you a clear, uninterrupted view.
Never Exhale Into the Mask to Clear Moisture:
This is a very commonly committed mistake. Many people think exhaling into the mask hard will help with clearing up the moisture from the lens, as it can be just scrubbed clean afterwards. While this may work for your glasses, it has quite the opposite effect on snorkel mask lenses. All that this will do is build up more moisture and fog up the lens even more.
The fogging up of the lens of the best full face snorkel mask 2018 is a common problem faced by snorkelers. The reasons for it can vary from an unclean lens to a loose fit. In order to stop the mask from fogging up, you need to identify the reason by applying the measures above, one by one.